User Guide for Beginner - Usage Precautions and Instructions

Welcome to Bitaxe Hex, a cutting-edge solo miner! As a first-time user, we understand that you might have some questions and concerns about how to properly handle and maintain your Hex. This guide will walk you through some important points. We highly recommend reading this manual before launching your device.

1. Careful Unboxing
Hex is equipped with a stunning acrylic panel that adds an elegant touch to its design. When removing Hex from its packaging, please proceed with caution. Gently lift and slowly extract the device to avoid applying excessive force, which could potentially cause the acrylic panel to shatter. Remember, slow and steady wins the race

2. Inserting Power Cord with Care
When connecting the power cord to Hex, use both hands for stability. With one hand, support the acrylic panel, while with the other, gently insert the power plug. This prevents undue pressure on the panel, reducing the risk of cracks or fractures.

Warning: The fan will start automatically when the power is connected. Do not put your fingers on the fan!

3. Loose Screws and Nuts
Hex is a handmade DIY product, where each component, including the screws, is manually assembled. To prevent undue stress on the acrylic panel, we tightened the screws only to a comfortable and secure level. During shipping, vibrations and movements may cause some screws or nuts to loosen slightly. This is a normal occurrence and does not indicate any defect in your Hex. Simply use a suitable screwdriver (M3 or M4) or your hands to gently tighten these loose fasteners.